Charging Status - TypeS AC57881 Manuel D'utilisation

OPERATING INSTRUCTIONS:
Note: Please read the vehicle's Owner's Manual before charging its battery or
removing any of its battery leads. Check if there are any recommendations for
charging the battery of your vehicle.
LCD Display Guide
a
b
d
f
i
Push Mode: Charges
a
batteries with voltage
between 0.5V and 3.75V.
Charging Mode: Charging
b
current, battery voltage, and
capacity will be displayed.

CHARGING STATUS

While charging vehicle battery, the LCD Display will show the charging status. Please
see example below for 12V & 6V battery:
Charging amps (A) and battery voltage (V) will alternate every 5 seconds.
i) Charging Current :
c
e
h
j g k
ii) Battery Voltage :
Maintenance Mode: When vehicle
c
battery is fully charged, the Battery Charger
& Maintainer enters Maintenance Mode,
releasing 0.3A charging current.
d Amp (A) or Voltage (V) Indicator
Vehicle Battery Capacity
e
( 25% / 50% / 75% / 100% )
Detected Battery Type: Standard (Wet Cell /
f
Flooded, SLA & Maintenance Free)
g
Detected Battery Type: AGM / GEL
Detected Battery Type: Lithium-ion
h
i
Repair Mode: For 12V LEAD ACID BATTERIES
ONLY. Recovers, repairs, and restores
damaged, stratified, and sulfated batteries.
j Vehicle Battery Detection: 6V or 12V battery
will be automatically detected.
k
Charging Current: 1A or 5A
8
( incl. LiFePO₄ )