Technical Data - Meec tools 017934 Mode D'emploi

EN

TECHNICAL DATA

Rated voltage
Power consumption
Speed, no load
Maximum cutting diameter.
Safety class
Protection rating
Bin
Weight
Sound pressure level, LpA 79.1 dB(A), K= 3 dB
Sound power level, LwA* 91.7 dB(A), K= 2.67 dB
Sound power level, LwA**
*Measured, **Guaranteed
Always wear ear protection!
The declared values for vibration and noise,
which have been measured by a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with
EN 50434:2014.
VARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
FIG. 1
1. Infeed funnel
30
230 V ~ 50 Hz
2800 W
60 rpm
44 mm
II
IPX4
60 l
19.4 kg
94 dB(A)
2. Plug
3. Lock button
4. Foot
5. Wheel
6. Wheel face
7. Knob to adjust blade plate
8. Handle
9. Safety switch
10. Power switch
11. Rotation selector
12. Back cover
13. Collection container
14. Feeder
ASSEMBLY
1. Turn the product upside down and bring
up the legs.
2. Put the wheel axle through the
openings.
FIG. 2
3. Put the supplied washer and sleeve on the
wheel axle.
FIG. 3
4. Put the wheels on, fit the nuts and tighten
by hand.
FIG. 4
5. Hold the wheel axle with the supplied
spanner and firmly tighten the nut with
the spanner.
FIG. 5
6. Put the wheel faces over the hubs.
FIG. 6
FITTING THE BIN
1. Press the lock button and put the bin in
the bottom part of the product.
FIG. 7
2. Press up the lock button.