Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
SAFETY INSTRUCTIONS
TRAINING
Read these instructions carefully before use,
and familiarise yourself with the controls on
the product and how they are used.
PREPARATIONS
•
Do not allow children to use the product.
Keep children under supervision to make
sure they do not play with the product.
•
Keep onlookers, especially children, and
pets at a safe distance when using the
product.
•
Wear ear protection and safety glasses.
•
Do not wear loose-fitting clothing, ties,
scarves, etc., that can get caught in
moving parts.
•
Only use the product in an open area (not
near a wall or other fixed object) and on a
firm, level surface.
•
Do not use the machine in areas where
ejected material could cause personal
injury.
•
Always check before use that all the screw
unions and other unions are properly
tightened, and that all the safety devices
are in place and working. Replace any
stickers that have become illegible or lost.
•
Place the product on a level, stable
surface.
HOW TO USE
•
Risk of personal injury as a result of parts
being ejected. Keep at a safe distance.
The minimum safe distance for onlookers
is 15 metres when the product is in use.
•
Check before starting that the infeed is
empty.
•
Keep your head and other parts of your
body away from the infeed opening.
•
Keep your hands and other parts of your
body, including your clothing, away from
the infeed, the ejector and moving parts.
28
•
Always maintain a firm footing and good
balance. Do not overreach. Never stand
higher up than the product when feeding.
•
When feeding make sure that no metal,
stones, glass, soil, plastic or other foreign
objects get into the product.
•
If the roller knocks against a foreign
object, or if the product starts vibrating or
making an abnormal noise, switch off the
product immediately, pull out the plug,
and wait until all moving parts have
completely stopped. Pull out the plug and
take the following precautions.
–
Check the product for damage.
–
Check and tighten any loose unions.
–
Have any damaged parts repaired or
replaced with parts of the same type.
•
Do not allow processed material to collect
in the ejector. This can prevent proper
emptying and can result in material being
thrown out through the infeed opening.
•
If the product gets blocked, switch off the
product, pull out the plug and wait until
all moving parts have completely stopped
before clearing the blockage. Keep the
motor free from debris and other deposits
to prevent a fire and/or material damage.
•
The safety devices must be fitted correctly
and work properly.
•
Do not transport the product when the
motor is running.
•
Switch off the product, pull out the plug
and wait until all moving parts have
completely stopped before leaving the
product unattended.
•
Do not tilt the product when the motor is
running.
WARNING!
The roller continues to rotate for some time
after the product has been switched off.
MAINTENANCE AND STORAGE
•
Switch off the product, pull out the plug,
and wait until all moving parts have
completely stopped before checking,
Publicité
Table des Matières
