Mounting And Operation; Maintenance And Cleaning - Bosch GST Professional 140 CE Notice Originale

OBJ_BUCH-1320-002.book Page 15 Tuesday, March 29, 2011 12:39 PM

Mounting and Operation

Action
Inserting the Saw Blade
Ejecting the Saw Blade
Adjusting the footplate
Switching on the sawdust blower device
Connecting the dust extraction
Adjusting the Cutting Angle
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate preselection
Switching the Power Tool On/Off
Guide the power tool toward the workpiece only when
switched on
Switching the worklight On/Off
Lubrication when cutting metal
Plunge Cutting
Mounting and use of the parallel guide
Selecting accessories

Maintenance and Cleaning

For safe and proper working, always keep
the machine and the ventilation slots as
well as the tool holder clean.
Clean the saw blade holder regularly. For this,
remove the saw blade from the machine and
lightly tap out the machine on a level surface.
Check the guide roller regularly. If worn, it must
be replaced through an authorised Bosch after-
sales service agent.
Lubricate the guide roller occasionally with a
drop of oil (see figure 18, page 228).
Bosch Power Tools
Figure
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
–
After-sales Service and
Customer Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer service representatives can answer
your questions concerning possible applications
and adjustment of products and accessories.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
2 609 932 772 | (29.3.11)
English | 15
Page
216
216
216–217
218
218–219
219–220
221
221
222
222–223
223–224
224
224–225
225
225–226
226–227
229–231