KitchenAid KSMVSAQ Mode D'emploi page 6

USING THE STAND MIXER ATTACHMENT
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
3
For Stand Mixers with a removable attachment hub cover: Turn the attachment
knob counterclockwise to remove attachment hub cover.
Insert the attachment shaft housing
into the attachment hub, making
certain the power shaft fits into the
square hub socket. If necessary, rotate
4
the attachment back and forth. The
pin on the attachment housing fits
into the notch of the hub rim when
in the proper position.
6 | USING THE STAND MIXER ATTACHMENT
Tighten the Stand Mixer attachment
hub knob until the attachment
is completely secured to the
5
Stand Mixer. Make sure that hub
knob is properly seated in the
retention hole in the attachment.