Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Setting Bake
Bake cooks with heat that rises from the oven bot-
tom. The heat and air circulate naturally in the oven.
A reminder tone will sound indicating when the set
bake temperature is reached and to place the food in
the oven.
The oven can be programmed to bake at any tem-
perature from 170°F to 550°F (77°C to 288°C). The
factory preset automatic bake temperature is 350°F
(177°C).
Baking Tips
•
Fully preheat the oven before baking.
•
When baking items like cookies, cakes, biscuits,
and breads using a single rack place rack in posi-
tion 4.
•
When using any single rack for items like frozen
pies, angel food cake, breads, and casseroles,
use rack position 3.
•
For best results when baking cakes using two
oven racks, place racks in positions 3 and 5 (See
Figure 11).
•
When baking using two oven racks, position
cookware as shown in Figure 11.
•
Allow at least 2 inches (5 cm) of space between
cookware for proper air circulation.
•
Do not leave oven light on while baking.
To set Bake:
1. Press Bake. — — — appears in the display.
2. Within 5 seconds, press
will show 350°F (177°C). The temperature can
then be adjusted in 5°F (1°C) increments.
3. When a key is released, the oven will begin heat-
ing to the selected temperature. When the oven
reaches the set temperature, the preheat indi-
cator light will turn off and the control will beep
three times.
4. To cancel the baking function, press OFF.
To change oven temperature after Bake has
started:
1. Press Bake.
2. Press
or
a new temperature. The oven indicator light on
the electronic display will turn on and off when
using the bake feature and during preheat. This
is normal and indicates that the oven is cycling
to maintain the selected baking temperature. To
cancel baking press OFF.
Figure 11: pan positions for two-rack baking
OVEN CONTROLS
or.
The display
to increase or decrease to
6
5
4
3
2
1
23
Publicité
Chapitres
Table des Matières
