Part Figure; Assembly Instructions - Midea NY2513-13A1L Mode D'emploi

WARNING: IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.

PART FIGURE

Handle
Caster assembly

ASSEMBLY INSTRUCTIONS

[Installation of the caster assembly]
1.Place the heater body inversely with the
bottom upward.
2.Connect and tighten two wheel carrier
plates to the body with butterfly nuts as
shown in the figure.
3.Place the heater upward after it is
installed securely with the wheels touching
the ground.
Fin
7 fins heater caster assembling
4
9\11\13 fins heater caster assembling