Part Figure; Use Of Oil Filled Radiator - Midea NY1507-20M Manuel De L'utilisateur

PART FIGURE

Power Switch Knob
Thermostat Knob
Cord wrap

Use of oil filled radiator

1,Turn the heater upside down.
2. As shown in figure 1, align the mounting hole of a set of caster assembly
and install it on the screw of the caster pad plate at the end of the radiator fin,
and The other caster assembly is aligned to the screws mounted at the
bottom of the control box.
3,As shown in figure 2, two sets of caster components are tightened with four
butterfly nuts. Install solid and then put the heater in place-just put the wheels
on the ground.
figure 1 figure 2
3
Fin
Caster assembly
butterfly nuts
control box