CLAS OE 9000 Mode D'emploi page 15

OE 9000
In order the lifter to operate you need connect the battery and remove
any protective packing inside the engine compartment.
To connect the battery follow the step below:
1) Press the emergency button
2) Open the cover of the base (engine compartment)
3) Connect the batteries as shown in Figures 2 and 3.
4) Close the engine compartment.
5) Release the emergency buttonles figures 2 et 3.
Connection to battery
BATTERIES CHARGES
This machine is equipped with an internal electronic battery charger with LED indicators
on the state of charging.
We recommend before using this machine to make a first recharge.
To charge the batteries connect the power cord to the power of the machine, connect
the other end to the 220 V ac main supply.
Turn on the charger through the switch on the machine.
The LEDs indicate the charging status automatically.
It is recommended to recharge the batteries when the charge state of the indicator
LED is yellow, without waiting for the battery is fully-discharged.
ATTENTION!
Unplug the power cord from the wall outlet before removing the plug from the machine.
ELECTRIC & RECHARGEABLE WHEEL LIFTER MAX. 60kg
USE
Engine compartment opening