Storing Your Own Sound Adjustments - JVC KW-XC410 Manuel D'instructions

Storing your own sound
adjustments
You can adjust the sound modes and store your
own adjustments in memory.
1
2
Select one of the sound mode to
adjust.
Ex.: When "JAZZ" is selected
3
Select the sound elements to adjust
while the selected sound mode is
shown.
LOW LEVEL O LOW FREQ. O
LOW WIDTH O MID LEVEL O
MID WIDTH O HIGH LEVEL O
HIGH FREQ. O (back to the
beginning)
• (LOW, MID, HIGH) LEVEL:
Adjust the enhancement level.
• (LOW, HIGH) FREQ:
Select the center frequency to adjust.
• (LOW, MID) WIDTH :
Select the band width level.
4
Adjust the selected sound elements
while the indication on step
shown.
Indication
LOW
LEVEL –06
(min.) to
+06
(max.)
FREQ 60Hz
80Hz
100Hz
120Hz
WIDTH 1 (min.)
to
4 (max.)
5
3
Repeat steps and
adjust) the other sound elements.
6
Select one of the user sound modes
(USER 1, USER 2, USER 3).
7
Store the adjustments.
"MEMORY" appears for a
while.
3
is
Preset values
MID HIGH
–06 –06
(min.) to (min.) to
+06 +06
(max.) (max.)
8kHz
10kHz
12kHz
15kHz
1 (min.)
to
2 (max.)
4
to set (or
19