Error Codes - Philips HB953 Manuel

Error codes

The display of the remote control may show error codes. Below we
will explain what you should do if an error code appears on the display.
Note: E01 appears in the display for 5 seconds and at the same time
you hear a beeping sound.
Note: E02 and codes with a higher number remain visible on the
display. If these codes appear, the appliance has a serious
problem and must not be used any longer.
Error code
E01
E02 and codes with a higher number
ENGLISH
Solution
Check whether the two lamp units are
in the right position (see 'appliance does
not start' in the 'Troubleshooting
guide').
Check the openings of the vents (see
'appliance does not start' in the
'Troubleshooting guide').
Check the UV filters (the special glass
panes that cover the lamps). If these
filters are broken, damaged or missing,
stop using the appliance and contact
your dealer or a Philips Service Centre.
Contact your local dealer or a Philips
Service Centre.
21