Setting Up Your Xl; Installing The Backup Batteries - Ameriphone XL-40 Manuel D'utilisation

Setting up Your XL-40

There are five initial steps involved
in setting up your XL-40 for the
first time.
1. Insert four AA alkaline
batteries for back-up in case
of AC power outage.
2. Decide if you want the
phone to sit on a desk or
hang on the wall.
3. Connect the telephone
components.
4. Program up to 12 telephone
numbers to call with the
press of a memory button.
5. Set up special features

Installing the Backup Batteries

If there is a power outage, the
XL-40 will operate for up to 48
hours with four AA alkaline
backup batteries (not included). If
the phone is not in use, the
batteries may last for several months.
Insert 4 AA
batteries
here
Press in
here with a
tip of a pen
to open
b tt
Figure 3 - Accessing the Batteries
To install new batteries:
1. Slide open the battery
compartment cover on the
bottom of the telephone
(Figure 3).
2. Install four fresh batteries. Be
sure to observe battery polarity
as imprinted on the base of
the compartment. The battery
indicator on the top panel
will light up if the batteries
are running low.
The phone operates as a regular
phone if there is no power or battery.
XL-40 Low Battery Indicator Light
If the batteries are weak or not
installed, the Low Battery indicator
will light up. Install fresh batteries
according to the directions above.
HOLD PROG
TONE
LO
Figure 4 - Low Battery Indicator Light
FLASH REDIAL
AMPLIFY
VOL
HI
E
N
G
L
I
S
H
4