Using Your Xl; Incoming Voice Volume - Ameriphone XL-40 Manuel D'utilisation

Using Your XL-40

Incoming Voice Volume

You can adjust the volume of
incoming calls by simply sliding
the VOL control. This gives you up
to 18 dB more volume. If you
want more amplification, follow
the directions below.
1. Press the AMPLIFY button as
shown in Figure 9 to turn the
incoming voice amplifier on or
off. When AMPLIFY is on, the
AMPLIFY indicator comes on.
HOLD
TONE
Figure 9 - AMPLIFY Button
and Indicator
2. Adjust the ear piece volume
while on a call by moving the
VOL slide control in Figure 10.
With AMPLIFY on, incoming
volume will be up to 40dB
louder.
7
0
* #
PROG FLASH REDIAL
AMPLIFY
VOL
LO HI
*
HOLD
TONE
LO
Figure 10 - Volume Slide Control
Caution: Repeated incremental
exposure to amplification levels
greater than 18 dB may be
harmful to individuals without
hearing disabilities. Therefore, do
not remove the warning label
attached to the back of the
handset. If it is likely that a
visually impaired person will use
the telephone, securely attach the
provided warning printed in
Braille to the back of the handset
(See Diagram A).
Diagram A.
0
#
PROG FLASH REDIAL
AMPLIFY
VOL
HI