Incoming Voice Tone; Ringer Volume And Tone; Hold - Ameriphone XL-40 Manuel D'utilisation

Using Your XL-40
(Continued)
In standard use, the amplifier
Note:
turns off when you hang up the
telephone. This is a useful feature
if many people use the phone. If
you want the amplifier to always
remain on, slide the Volume Reset
Override switch on the bottom of
the phone to ON, as shown in
Figure 11.
Figure 11 - Volume Reset Override
On/Off

Incoming Voice Tone

The XL-40 provides extra
amplification in the sound frequency
range you need to boost. To
identify the range that best suits
your needs, follow these steps:
1. When you hear a voice on the
line, press the AMPLIFY button
shown in Figure 9.
2. Adjust the TONE slide control in
Figure 12 to suit your hearing.
- OFF
MANUAL
AUTO
- ON
Volume
Reset
Override
*

HOLD

TONE
LO
Figure 12 - Tone Slide Control

Ringer Volume and Tone

1. You can adjust the RINGER
VOLUME as high as 95+
decibels. The settings available
are LO, MED and HI as shown
in Figure 13.
RINGER
RING TONE
Lo Med Hi
Lo
Figure 13 - Ringer Volume & Pitch
2. The RING TONE has two pitch
settings: LO and HI.
Hold
To put the line on hold, press the
HOLD button and return the hand-
set to its cradle. You will notice the
HOLD indicator light comes on.
0 #
PROG FLASH REDIAL
AMPLIFY
VOL
HI
AUDIO
DIAL
Hi T P
OUTPUT
E
N
G
L
I
S
H
8