Tripp-Lite PDUMH15NET Manuel Du Propriétaire page 8

Installation
Networking the PDU
Testing Network Connection
6-1
Access PDU with Web Browser: After an
IP address has been assigned to the PDU, attempt
to access it with a Web browser that supports
frames, forms and Java ™ . Open a Web browser
on a computer connected to the LAN and enter
the IP address assigned to the PDU. You should
be prompted for a password
admin and the default password is admin. After
you enter the user name and password, the
PowerAlert Status page
browser window. For more information about
configuration and operation of the PDU via the
PowerAlert interface, refer to the
SNMPWEBCARD User's Guide, included on the
CD-ROM bundled with the PDU.
Note for Network Management System Users Only: Two MIB files
- Tripplite.mib and RFC1628.mib - must be loaded on each
Network Management Station that will monitor the PDU via
SNMP. The files are provided on the CD-ROM included in the
product package.
201110149-93-2718.indd 8
continued
continued
. The user name is
A
will appear in the
B
A
B
8
11/9/2011 11:17:33 AM