Chauvet DJ Freedom Par Quad-4 IP MR Manuel De Référence page 4

Freedom™ Par Quad-4 IP QRG
Overview
AC Power
Fuse Replacement
Infrared Sensor
Top View
Front View
Weather
Resistant
Cover
Display
Menu
Buttons
On/Off
Switch
Freedom™ Par Quad-4 IP has an auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
The Weather Resistant cover must be secured in the lowered position during
operation to adhere to IP54 outdoor ratings.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Carry
Handle
D-Fi™ AUTO
Glare
Shield
Clear Button
4
Sync/
Fuse Holder
Power In
Kickstand
EN