JVC KW-R920BT Manuel D'instructions page 18

BLUETOOTH®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the current
call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone....
1
Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
14
On the faceplate
Press or the volume knob.
Press and hold or the volume
knob.
Press and hold or the volume
knob.
Press .
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press during a call.
• Operations may vary according to
the connected Bluetooth device.
.
MIC LEVEL
–10 — +10 (–4): The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –5 — +5 (0): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER 01 SEC — 30 SEC: The unit answers incoming call automatically in
the selected time (in seconds). ; OFF: Cancels.
RING COLOR COLOR 01 — COLOR 49 (COLOR 08): Selects the notification light
color for the buttons when there is an incoming call and during a call. ;
OFF : Cancels.
Default: XX
.
Default: XX