Analog Radio - JVC KW-R920BT Manuel D'instructions

ANALOG RADIO

"ST" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2
Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until "PRESET MODE" flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and "MEMORY" appears.
8
Select a stored station
Press or one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1 Press and hold .
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press to exit.
To return to the previous setting item, press
RADIO TIMER ( 6)
SSM SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to
18 stations for FM. "SSM" stops flashing when the first 6 stations are stored.
Select SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
.
Default: XX