Sleep Timer; Factory Reset; Battery Charging - Albrecht Audio DR 62 Manuel

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Time/Date – The time and date are set automatically.
Software version
Frequency – the FM frequency for the current radio station.
Auto / Stereo: Automatic switching between mono and stereo reception.
PTY (Programme Type): Popmusic, Talk, News etc.
Note: The time and date accuracy depends on the info broadcasted from the radio station.

5. Sleep timer

The sleep timer switches the radio off automatically after an adjustable time.
Long press the SLEEP button to enter the Sleep timer settings. You can choose between these
options: 15/30/45/60/90 Minutes/OFF. Press the ◄/► to choose the desired time and confirm with
OK. The remaining time until the radio switches off automatically will be displayed in the top right
corner (e.g. „S15" if you selected 15 Minutes).
To cancel the sleep timer, select OFF from the timer option and press OK to confirm.

6. Factory reset

Turn off the radio first.
Afterwards press and hold
"RESET System".
The radio will restart automatically.
Attention: once you do this operation, all your personal settings like preset stations will be deleted!

7. Battery charging

The Albrecht DR 62 comes with an integrated Lithium Ion battery pack which allows the radio
operation for up to 6 hours without recharging.
You can check the current level of battery power through the INFO button.
When the radio is playing, press the INFO button repeatedly until you see the battery indicator on
the bottom right of the display.
When battery power is low, it will prompt the message "Battery Low" to remind for battery charging.
To charge the battery, connect the Micro-USB plug to the „DC In 5V" port at the rear side of the
radio, connect the other end to a power source supplied with 5V OUT. The LED will light up in red
indicating that the battery is charging.
If the radio is in OFF mode while charging, the LED will turn to green when charging is done. If the
radio is ON while charging, the LED remains red even when charging is completed.
14
and FAV/SCAN simultaneously until the display is lit and shows

Publicité

Table des Matières
loading

Table des Matières