Emerson MIDWAY ECO LED Mode D'emploi page 10

3. Ceiling Fan Assembly
3.14
Remove and retain one of the three #8-32 x .375" pan
head screws in the lower housing and loosen the
remaining two #8-32 x .375" pan head screws (Figure 14).
3.15
Securely connect the LED light fixture white wire terminal
to the motor assembly white wire terminal (Figure 15).
Securely connect the LED light fixture black wire terminal
to the motor assembly blue wire terminal (Figure 15).
Tuck wires into the LED light fixture assembly and position
on the lower housing assembly.
NOTE: Make sure wires and terminals are positioned
under the LED light fixture assembly and not pinched
between LED light fixture assembly and lower
housing.
(Continued)
REMOVE ONE #8-32 x .375"
PAN HEAD SCREW
LOWER HOUSING
LOOSEN TWO
#8-32 x .375"
PAN HEAD
SCREWS
Figure 14
LED LIGHT
FIXTURE
LOWER
HOUSING
Figure 15
10
LED LIGHT FIXTURE
WHITE WIRE
LED LIGHT FIXTURE
BLACK WIRE
MOTOR ASSEMBLY
BLUE WIRE
MOTOR ASSEMBLY
WHITE WIRE
ETL Model No.: CF955L