Configuring The Wireless Lan Router - Hama MiMo 300 Express Mode D'emploi

3. Configuring the Wireless LAN Router
To start the configuration process, open your browser and enter "http://192.168.2.1" as the address.
The login window is then displayed. By default, the user name is set to admin and the password is 1234. After
entering these, click OK to log on to the router.
You can configure the router via the integrated Setup Wizard or manually. After configuration using the Setup
Wizard, the device is set so that the connected computers can access the internet.
Note! For security reasons, you must change your user name and password. The standard
settings are identical for many devices and can allow others to access the router
configuration. See Page 13 for information.
3.1 Configuring the Internet Connection using the Setup Wizard
Please start the Setup Wizard after logging in by clicking Quick Setup.
Time Zone
For Set Time Zone choose the appropriate time zone, e.g. GMT sGreenwich Mean Time: Dublin,
Edinburgh, Lisbon, London for England. The remaining settings can be left as they are. Click => Next to
continue.
Broadband Type
Next, you are prompted to specify the WAN connection type. Your service provider will provide you with
user-specific information. There is a brief description of the various connection types on the overview page.
Due to the widespread use of DSL via PPPoE, the remainder of the description will refer to this type of
connection.
For the PPPoE connection type, click PPPoE xDSL
IP Address Info
You must enter the access data for
your provider in the next window. See
your documents or contact the
provider directly for this information.
5