Introduction; Witch Description - D-Link DGS-1016D Manuel

Introduction

Switch Description
Switch Features
D-Link Green Technology
Ports
Front-Panel Components
LED Indicators
Power Input on Rear Panel
Switch Description
The 16-port DGS-1016D and 24-port DGS-1024D Switches provide
dedicated 10, 100 or 1000 Mbps Ethernet bandwidth on each port.
The ports will automatically detect the speed, duplex and MDI/MDIX
status of the device it is connecting to, and adjust these settings
accordingly. The Switch ports can be used to network computers,
printers, servers, routers, other switches or any device equipped
with an Ethernet port. For best performance, use Category 5 or
better Ethernet cabling.
This stand alone Switch is very easy to set up. There is no network
management is required; simply power on the Switch and connect
the cables.
However, please keep in mind that the standard rules of available
Ethernet cable length from one device to another which cannot
exceed 100 meters (or 300 feet).
SECTION 1
1