Attaching The Rubber Feet; Provide For Adequate Ventilation - D-Link DGS-1016D Manuel

2. Firmly attach the ears to the rack as shown. Please follow the
usual safety precautions for rack-mountable products

Attaching the Rubber Feet

Use rubber feet provided. Position and apply rubber feet to the
underside of the DGS-1016D/1024D Switch.

Provide for Adequate Ventilation

CAUTION: Do not place any device on top of Switch,
or place the Switch on top of any device or object that
will block the free flow of air through the ventilation
slots on the sides, top, and bottom of the Switch's
case. In addition, care should be taken not to locate
the Switch next to, on top of, or underneath any
device that generates a significant amount of heat.
For the Switch to perform at its optimal level, the
Switch must have adequate ventilation to prevent the
Switch from overheating and becoming damaged.
Attaching the Rubber Feet
15