Kettler 0S05011-0000 Instructions De Montage page 7

GB IRL
tighten nuts completely against resistance (locking device). Then check that all screw
connections have been tightened firmly. Attention: once locknuts have been unscrewed
they no longer function correctly (the locking device is destroyed), and must be replaced.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
List of spare parts
When ordering spare parts, always state the full item number, spare-partnumber, the quan-
tity required and the S/N of the product (see spare parts drawing).
Example order: item no. 0S05011-0000/ spare-part no. 94211615 / 2 pieces / S/N......
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the
words „with fastening material".
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary. Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if possible. It is important to
provide a detailed defect description / damage report!
GB
KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire
B98 9HL
www.kettler.co.uk
USA
KETTLER International Inc.
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 588995
+44 1527 62423
e-mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
e-mail: patio@kettlerusa.com
1x
7