Kohler TROCADERO POWER LITE Instructions D'installation page 4

3. INSTALLATION
A. INSTALL TOILET GASKET
Place new toilet onto padding with the side of the toilet
opposite the trip lever facing down.
Firmly place gasket on toilet outlet. If using a gasket with
integral plastic sleeve, position gasket with sleeve facing
away from toilet.
NOTE: If a rag or other plug was placed in closet flange,
remove rag from closet flange before setting toilet.
B. ALIGN AND SET TOILET
Carefully align and lower toilet over the closet flange and
T-bolts.
CAUTION: Do not lift or rock toilet after
placement. A new gasket must be reapplied if
you break the watertight seal.
Apply full body weight to toilet rim to set seal.
A
1007288-2-
Gasket
Fig. #7
4
Fig. #6
Closet
Flange
T-Bolts
Kohler Co., Kohler, WI U.S.A.