Select Fm Transmitting Frequency (Manual Mode); Connection Via Audio Cable - Albrecht Audio DR 57 Manuel

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

be shown at the header, e.g. TX 108.0MHz
Then tune your car FM radio system to match the selected
FM transmitting frequency for transmission of the audio sig-
nal from DR 57 to your car stereo audio system.

4.1.2. Select FM Transmitting Frequency (Manual Mode):

Press the TX button to enter FM transmitting frequency se-
lection mode.
Then rotate the navigation knob to select your favourite va-
cant frequency (based on your past experience with known
vacant frequencies in your area) which you would like to
receive by your car radio.
The screen will go back to DAB+ mode automatically after
3 seconds and the selected frequency will be shown at the
header, e.g. TX 108.0MHz.
Remarks: "Vacant frequency" means there is no FM radio
broadcasting content or noise when the frequency is selected.

4.2. Connection via Audio Cable

Connect the 3.5mm AUDIO OUT socket of the DR 57
through the supplied audio cable with the line-in socket of
your car radio.
Press and hold Menu to enter the menu, rotate the naviga-
tion knob to search for Audio Out and confirm by pressing
the navigation knob. Rotate the navigation knob to select
Audio Out socket and confirm by pressing the Navigation
Knob. A headphone icon
Remark: In Audio Out socket mode, there will be no FM trans-
mission to the car stereo.
will be displayed at the header.
31

Publicité

Table des Matières
loading

Table des Matières