Connecting The Dr56+ To The Car Radio; Setting The Fm Transmitter Frequency; Connecting To The Car Radio Via Audio Cable; Adjusting The Volume - Albrecht Audio DR 56+ Mode D'emploi

4. Connecting the DR56+ to the car radio

You can either send the audio signal via FM transmitter or
transmit it directly with the 3.5mm audio cable via the Aux out
(audio out) output to your car radio.

4.1. Setting the FM transmitter frequency

Press the FREQ button and then rotate the ◄► knob
•
until you find the desired free frequency.
The transmission frequency is displayed at the bottom of
•
the screen as TX frequency (e.g. 107.0Mhz) during the
setup, and constantly at the top right of the display.
The DAB+ station name will be transmitted via RDS to
•
your car radio (if supported by your radio)
Please note: "Free frequency" means that no FM station
and no interference signals are transmitted on the selected
frequency.

4.2. Connecting to the car radio via audio cable

Plug the supplied 3.5mm audio cable into the AUX OUT
•
socket of the DR 56+ and into the line-in socket of your
car radio.
Please note: As soon as a plug is inserted in the AUX OUT
socket, transmission via FM transmitter is switched off!

4.3. Adjusting the volume

Press and hold the volume knob. A volume bar appears on the
display. You can now adjust the volume.
28