Maintenance; General Maintenance Information; Cleaning; Periodic Inspection - Buffalo filter PlumeSafe Turbo Manuel De L'opérateur

3.1 General Maintenance Information

This section contains information for ordinary upkeep of the BUFFALO FILTER Turbo
Auto-Sense™ Smoke Evacuation System. While the system has been designed and manufactured to high
industry standards, it is recommended that periodic inspection and performance testing be performed by
a qualified Biomedical Technician to ensure continued safe and effective operation.

3.2 Cleaning

Unplug Unit. Wipe unit with a damp cloth containing mild disinfectant solution or soapy water. Wipe
dry with a clean cloth. Do not steam sterilize.

3.3 Periodic Inspection

The Turbo Auto-Sense™ Smoke Evacuation System should be visually inspected at least every year. This
inspection should include checks for:
• Damage to the power cord.
• Damage to the power plug or power inlet module.
• Proper mating, cleanliness and absence of damage to the filter inlet.
• Obvious external or internal damage to the system.
3.4 Troubleshooting the System – see below.
PROBLEM
1. Smoke Evacuation System
is ON but suction is
minimal
or none.
2. Smoke Evacuation System
does not function even
though suction ON but-
ton is depressed.

Maintenance

Section 3.0
POTENTIAL CAUSE
1. Filter is not seated
completely.
2. Filter is clogged.
3. Vacuum tubing is clogged.
4. Motor/blower is obstructed.
1. Not plugged into an electrical
outlet.
2. Fuses are blown.
3. Electronic system failure.
4. Filter life has expired or
invalid filter installed.
CORRECTIVE ACTION
1. Re-install ViroSafe® Filter, press firmly into place and
fully engage clip.
2. Replace filter with a genuine ViroSafe® Filter.
3. Replace vacuum hose or tube with genuine
Buffalo Filter® products.
4. Call BioMed or Buffalo Filter Technical Services at
1.800.343.2324 or +1.716.835.7000.
1. Check power outlet and connection to rear or
side panel of the machine.
2. Call BioMed or Buffalo Filter Technical Services at
1.800.343.2324 or +1.716.835.7000
3. Call BioMed or Buffalo Filter Technical Services at
1.800.343.2324 or +1.716.835.7000
4. Replace filter with a genuine Bovie® SF35 filter.
Buffalo Filter Turbo Auto-Sense ™ Operator's Manual: Page 22