Operating Instructions; System Controls; Power On/Off; Suction Control - Buffalo filter PlumeSafe Turbo Manuel De L'opérateur

2.1 System Controls

The Turbo Auto-Sense™ LCD control display is user-friendly and completely interactive, allowing for easy
to understand use (as displayed on the LCD screen).
Key Pad Diagram:
The following items are important for the operation of your system

POWER ON/OFF

The main power switch is located on the rear panel of your smoke evacuator. This switch completely
enables and disables the main power.
When the unit is powered on the
following LCD screen will appear.
After inserting a filter a screen will
flash for a few seconds to indicate
filter type and original life.
Next, the standard screen will appear
which displays information regarding
the unit's current activity.
MOTOR ON/OFF
The Motor ON/OFF button is located on the LCD key pad (Figure 1). This button turns the motor (for
suction) on and off.

SUCTION CONTROL

The amount of suction may be adjusted using the UP or DOWN arrow buttons located on the key
pad (Figure 1). It is recommended that you select the lowest suction setting that effectively clears the
operative field of surgical smoke.

Operating Instructions

Section 2.0
LCD Panel
Suction Motor
ON/OFF
Buffalo Filter Turbo Auto-Sense
Increase Suction
TURBO Mode Button
Decrease Suction
™ Operator's Manual: Page 11