Tripp-Lite PDU3VSR6L2120 Manuel Du Propriétaire page 12

Using the Digital Display
These options are only available when a sensor such as Tripp Lite's ENVIROSENSE is attached
(sold separately). Press Mode button to toggle between options and data within a menu. A
momentary press of the arrow buttons switches between menus. A long press skips between
measurement categories. The scrolling pattern of the display is outlined below.
Scrolling Through Temperature Readings (Measurement Category)
Temperature (T)
4 0
5 i
Temperature Unit Options (Configuration Category)
C – F
C
Press Mode button to toggle between options and data within a menu. A momentary press of the
arrow buttons switches between menus. A long press skips between measurement categories.
The scrolling pattern of the display is outlined below.
Scroll Function Options (Configuration Category)
Y
14-04-275-9332F8.indb 12
Humidity (%RH)
8 0
5 i
C – F
3 Seconds
F
Hold Mode button for 3 seconds to
switch between options. The letter
in the 2-digit display indicates the
selected unit, C for Celsius and F for
Fahrenheit.
When enabled, the Auto
Scroll function displays
data for Input Phases, Load
Unbalance and Load Banks in
4-second intervals. Y indicates
the function is enabled; N
indicates that it is disabled.
Pressing any button interrupts
the auto scroll function,
allowing the user to navigate
between menu options. If no
button is pressed, there is a
10 second timeout.
Note: Hold Mode button for 3
To LED
seconds to switch between options.
Brightness
The letter in the 2-digit display
indicates the selected option.
12
4/30/2014 4:29:24 PM