Battery Replacement; Fuse Replacement - Klein Tools MM600 Manuel D'utilisation

BATTERY REPLACEMENT

When indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery/fuse door.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery/fuse door and fasten securely with screw.

FUSE REPLACEMENT

A fuse may blow if more than 500mA is applied to the A/mA jack
or more than 10A is applied to the 10A jack
1. Remove screw from battery/fuse door.
2. Replace blown fuse(s) with:
A/mA jack
10A jack
3. Replace battery/fuse door and fasten securely with screw.
500mA/1000V fast-blow fuse
(Klein Cat. No. 69035)
To avoid risk of electric shock, disconnect leads from any voltage
source before removing battery/fuse door.
To avoid risk of electric shock, do not operate meter while
battery/fuse door is removed.
MAINTENANCE
: 500mA/1000V fast-blow (Klein Cat. No. 69035)
6
: 10A/1000V fast-blow (Klein Cat. No. 69034)
3
. To access fuses:
3
10A/1000V fast-blow fuse
(Klein Cat. No. 69034)
,
6
17