Klein Tools MM600 Manuel D'utilisation page 15

CAPACITANCE
1. Insert RED test lead into V jack
COM jack
4
Capacitance
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
FREQUENCY / DUTY-CYCLE
1. Insert RED test lead into V jack
COM jack
Frequency/Duty-Cycle
NOTE: The meter defaults to Frequency testing in this mode. To enter
Duty-Cycle testing mode, press the "SEL" button
that the appropriate icon (either Hz or % ) appears on the display.
2. Measure by connecting test leads across the circuit.
OPERATING INSTRUCTIONS
, and rotate function selector switch
setting. Display should read 0 nF with leads open.
Black lead Red lead
, and rotate function selector switch
4
Black lead Red lead
, and BLACK test lead into
5
and BLACK test lead into
5
setting.
to the
2
to the
2
once. Ensure
11
15