Additional Features; Connecting The Interface - OHAUS Scout SJX Serie Guide De Démarrage Rapide

Quick Start Guide

ADDITIONAL FEATURES



Connecting the Interface

Use an optional interface connectivity
kit to connect the balance either to a
computer, printer or OHAUS auxiliary
display.
Below Interface kit accessories are
available:
RS232, USB Host, USB Device,
Ethernet, Bluetooth
* Interface kits may vary according to local regulations

Weigh Below Hook
The weigh below hook on SJX/E models is located at the reverse
side of the battery cover as shown below (on SJX models it is located in
the weigh below protective cover). To use this feature, remove the red
protective cover underneath for the weigh below opening.
MAINTENANCE
Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the
power supply before cleaning.
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
Attention: Do not use solvents, chemicals, alcohol, ammonia or abrasives to
clean the housing or control panel.
Ohaus Corporation www.ohaus.com
Interface connection on the rear of the
balance:
*
.
Interface connection
Weigh below protective cover
Weigh below
hook
(SJX/E)
0
vii
TM
Scout SJX Balances
AC Adapter Jack
TM
Scout SJX Balances
Security slot