Maintenance - Allmatic NC8 Serie Instructions De Service

ALLMATIC
Fault
Clamping force cannot be
released.
12

Maintenance

Only OEM parts must be used as replacement parts. Only use non-OEM parts with the
permission of ALLMATIC-Jakob Spannsysteme GmbH.
Maintenance and repair may only be carried out by qualified personnel.
WARNING
Falling of the NC8.
Crushing of hands and feet.
Ø Use suitable lifting gear only.
Ø Wear personal protective equipment.
Wear safety gloves!
Wear safety shoes!
Wear safety goggles!
NC8 Series
Cause
Power assist defective.
Maintenance | 12
Remedy
Unscrew pressure plate from
base part. EN
73 / 410