Manufacturer Information; Warranty And Liability; Copyright - Allmatic NC8 Serie Instructions De Service

2 | User Information
Wear safety shoes!
2.3

Manufacturer Information

ALLMATIC-Jakob Spannsysteme GmbH
Jägermühle 10, 87647 Unterthingau, Germany
Phone: +49 (0) 8377 929-0
Fax: +49 (0) 8377 929-380
E-mail: info@allmatic.de
www.allmatic.de
2.4

Warranty and Liability

All information and instructions contained in this operating manual are provided on the basis of
our experience and to the best of our knowledge. The technical information and data described
in this operating manual are valid as of 01.05.2018. Our products are subject to continual fur-
ther development. We therefore reserve the right to implement changes and improvements
which we consider necessary. However, this does not represent an obligation to extend these
to products previously supplied. Therefore, no claims can be derived from the information and
descriptions given in this operating manual. This operating manual must always be available in
the vicinity of the clamping system.
2.5

Copyright

The contents published in this operating manual are subject to German copyright laws. The op-
erating manual is only intended for the operator and the users of the NC8 clamping systems.
All forms of reproduction and forwarding to third parties require the prior approval of
ALLMATIC-Jakob Spannsysteme GmbH.
All copyright infringements may have consequences under penal law.
44 / 410
ALLMATIC
NC8 Series