Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ALLMATIC
7.3
Zero Point Clamping System
The NC8 - 90 and the NC8 - 125 M can be mounted with a zero point clamping system.
The clamping bolts are not included in the scope of supply.
1
1. Turn the two screw plugs (1) out of the openings.
2. Fit the clamping bolts (2) with the relevant screws.
ð The screw plugs (1) must be screwed in again as soon as the clamping bolts are re-
moved.
NC8 Series
2
Installation on the Machine Table | 7
EN
59 / 410
Publicité
Chapitres
Table des Matières
