Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
b) 2.4G USB connection
1 Slide the Power Switch (11) to ON.
2 Remove the USB receiver from the USB slot (12).
3 Press the Mode Switch button (5) to toggle to 2.4G mode.
4 Plug the USB receiver into the computer.
c) Bluetooth connection
1 Slide the Power Switch (11) to on.
2 Press the Mode Switch button (5) to toggle to BT1 or BT2 mode.
3 Long press the Mode Switch button (5) for 3-5 seconds until the blue indicator light flickers
quickly and the mouse is pairing.
(Windows 10)
(Mac OS)
4.
Go to Settings >
Go to System
Devices > Bluetooth
Preferences.
devices.
5.
Click "Add or delete
Click "Bluetooth".
Bluetooth device".
6.
Search "BT 4.0+2.4G
Search "BT
Mouse" and click
4.0+2.4G Mouse"
to pair.
and click to pair.
7.
When connected,
When the driver
the mouse is ready
has installed, the
for use.
mouse is ready
for use.
d) Charging
When the mouse battery is low, the red light will flicker continuously until it turns off. Use the
supplied USB cable to charge the battery. While charging, the BT2 indicator light will be on
continuously for 1-3.5 hours and will turn off when the battery is fully charged.
The charging indicator turns blue during the charging process
and switches off when the battery is fully charged.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
(iOS 13 or later)
(Android)
Go to Accessibility >
Go to Settings >
Touch.
Bluetooth.
Enable "Assistive
Turn on Bluetooth,
Touch".
search for "BT
4.0+2.4G Mouse" and
tap "Pair".
Turn on Bluetooth,
When paired, the
search for "BT
mouse is ready for
4.0+2.4G Mouse" and
use.
tap "Pair".
When paired, the
mouse is ready for
use.
Publicité
Table des Matières
