Operating Instructions
Rechargeable ergonomic mouse for 2.4 GHz
wireless transmission and Bluetooth
Item No. 2340779
Intended use
This plug-and-play rechargeable mouse features an ergonomic design and a USB Type-
C™+USB combined receiver for use with a wide range of devices. The mouse includes 2.4
GHz and Bluetooth (2.4G +4.0BT) connection modes, a 300 mAh rechargeable Li-battery and
six buttons with a click scroll wheel.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. In addition,
improper use can result in short circuits, fires or other hazards. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• USB receiver
• USB Type-C™ charging cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
Is visibly damaged,
-
Is no longer working properly,
-
Has been stored for extended periods in poor ambient conditions, or
-
Has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) LiPo battery
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the
rechargeable battery might cause an explosion or a fire! Unlike conventional
batteries/rechargeable batteries (e.g. AA or AAA type), the casing of the LiPo
rechargeable battery does not consist of a thin sheet but rather a sensitive plastic
film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the
product. Due to the rechargeable battery technology being used, you do not need
to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.
c) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
Operating elements
1
2
3
4
5
9
6
7
8
13
14
1 Left button
2 Right button
3 Scroll wheel
4 DPI button
5 Mode switch button
6 USB indicator
7 BT1 indicator
8 BT2 indicator
Operation
a) Switching modes
Press the Mode Switch button (5) to toggle between the BT1, BT2 and the Type-C+USB
connection modes.
BT1 Device Connected
USB & Type-C
Receiver
Connected
10
11
12
15
9 Charging indicator
10 Type-C charging port
11 Power switch
12 USB slot
13 USB receiver
14 Forwards
15 Back
BT2 Device
Connected