Quick Setup; Sync; Tx Par 1; Tx Par 2 - dB Technologies RS16000TR Caractéristiques Techniques

English English

QUICK SETUP

It allows making an immediate synchronisation based on
the best channel for the receiver:
• through "QUICK SCAN" the system detects the best
channel
• through "Sync Rx -> Tx" the synchronisation is
carried out according to the procedure described in
the relevant paragraph and the receiver assigns this
channel to the transmitter

SYNC

It performs the synchronisation in manual mode:
• (Rx -> Tx)
and TX PAR2 menus of the receiver are written on the
transmitter
• (Tx -> Rx) the parameters of the transmitter are read
and saved on the receiver

TX PAR 1

It allows:
• setting the "Name" associated to the transmitter
• setting the "Gain" on RS16000H transmitter with
possible values [-10, -4, 0, +6, +10, +23] dB
• choosing the transmission power "RF Power" with
possible values [10, 50] mW

TX PAR 2

It allows:
• using an "Encrypt" coding that, if enabled, allows
decoding the associated transmitter only from this
particular receiver
• using a "Button Lock" function on the transmitter
• detecting the "Type" of transmitter (Body/Handheld)
synchronised in that moment
RS16000TR
the parameters of the TX PAR1
QUICK SETUP
Quick scan
Sync Rx -> Tx
SYNC
Rx -> Tx
Tx -> Rx
TX PAR 1
Name SingerName
Gain
RF Power
TX PAR 2
Encrypt
Button Lock
Type
0 dB
50 mW
OFF
OFF
Body
Cod. 420120285 REV. 1.0
35