Rs16000R Receiver; Main Features And User Interface; Home Page - dB Technologies RS16000TR Caractéristiques Techniques

4. RS16000R RECEIVER

M
NOTE The back of RS16000R is shown
for information only. Access inside the
RS16000TR rack is allowed only in some
cases, see chapter "Firmware
"LINE" UNBALANCED AUDIO OUTPUT
POWER CONNECTOR
BALANCED AUDIO OUTPUT WITH "MIC/LINE" SWITCH

MAIN FEATURES AND USER INTERFACE

RS16000R is a professional receiver that can cover the whole UHF band, from 470 to 865 MHz,
according to the limits of the Countries of use. It is characterised by a digital modulation system
that ensures great immunity to interferences and is equipped with different functions that
allow its control in real time and from remote. This paragraph illustrates the different pages
and the relevant parameters displayed to the user. [P], [R], [S], and [T] controls allow selecting
and increasing-decreasing values. In particular, moving forward and backward through the
pages is carried out by pressing the "UP" [R] or "DOWN" [S] keys. On the contrary, rotating or
pressing knob [P] allows selecting/confirming inside the page.. The "ESC" key [T] brings you
back to the home page.
In general, the change of the different parameters is carried out on receiver (or from remote).
Consequently, these are sent to the transmitter after the infrared synchronisation.

HOME PAGE

The parameters displayed in this page are listed below. In this
list, the modifiable ones are highlighted with the letter [M]:
1. Country of use [M]
2. User name associated to the synchronised transmitter
3. MUTED/UNMUTED symbol
4. Antenna A signal intensity indicator
5. Antenna B signal intensity indicator
6. Input interference level indicator
7. Bank, according to the formatting displayed next to
this note [M]
8. Channel [M]
9. Tuning frequency
10. Transmitter reception
11. Transmitter battery level
RS16000TR
34
O
P
N
upgrade"
Q
M ON-STAND-BY key
N Audio signal intensity LED
O Display
P Select-Push knob
Q I.R. interface
R
R Up key
S Down key
S
T Esc key
T
NETWORK CONNECTOR
BNC -> ANTENNA B
ITA Tx Name
1
11
bank i3 (67) 01
channel
Freq 470.100 MHz
10
INTERMODULATION ORDER
bank i3 (67) 01
English
English
USB CONNECTOR
BNC -> ANTENNA A
2 4
3
7
8
01
5
6
9
BANK
AVAILABLE CHANNELS
Cod. 420120285 REV. 1.0