Adjustments - Pattfield Ergo Tools PE-20 IDB Traduction De La Notice Originale

ATTACH BATTERY
1 Slide the battery 6 (not included) onto
the tool until you hear a click.
Caution! Only use the batteries
specified in technical data.
FIT BIT
1 Pull the chuck sleeve forward and in-
sert the required bit into the chuck 1.
Release the chuck sleeve.
Caution! Before changing bits, cen-
tre the rotation direction switch, in
order to lock the tool.
ROTATION DIRECTION
1 To drive in screws, set the rotation di-
8
rection switch to
.
Caution! Wait until the chuck has
stopped rotating before changing
the rotation direction.

Adjustments

130 EN
2 To release the battery, press the bat-
tery release switch 5 and slide off the
tool.
REMOVE BIT
2 Pull the chuck sleeve forward and re-
move the bit. Release the chuck sleeve.
2 To loosen screws, set the rotation di-
8
rection switch to
.
1
1
1.
2.
1
1
1.
2.
2
1.
2.
2