For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Given unfavorable conditions in the power supply the equipment may cause the voltage to drop tem-
porarily. If the supply impedance "Z" at the connection point to the public power supply exceeds 0.391 Ω
it may be necessary to take further measures before the equipment can be used as intended from this
power supply. If necessary, you can ask your local electricity supply company for the impedance value.
Anl_HMH_E_2440_SPK7.indb 22
Anl_HMH_E_2440_SPK7.indb 22
GB
- 22 -
27.04.15 15:18
27.04.15 15:18