Troubleshooting - Klarstein Iceblock Mode D'emploi

EN
42

TROUBLESHOOTING

The table below lists the most common errors and maintenance methods for this
appliance. If errors occur during use, refer to the table for easy diagnosis and
maintenance. If the error still cannot be corrected, please contact professional
maintenance personnel.
Problem
The appliance does not
work.
The appliance starts
frequently.
The appliance is very loud. The appliance stands
The compressor is not
working.
Possible cause
No display
"FL" is shown on the
display.
The timer shut-off function
has been started.
Direct sunlight
Doors and windows are
open or there are many
people or heat sources in
the room.
The filters are very dirty.
Air inlet or air outlet
openings are blocked.
unevenly or wobbles.
The compressor protection
function is active.
Possible solution
Check that the power
plug is plugged in and
that the power cord is
undamaged.
Switch off the appliance
and empty the water tank.
Restart the appliance
and the display returns to
normal.
The appliance can be
restarted 3 minutes after it
has been switched off.
Close the curtains.
Close doors and windows
and remove heat sources.
Clean or replace the
filters.
Remove the dirt.
Place the appliance on
a firm, level surface on
which it cannot wobble.
Wait 3 minutes for the
appliance to cool down
and then restart it.