Product Use; Securing Child In Child Restraint - Nuna PIPA lite Mode D'emploi

Product Use

Securing Child in Child Restraint

1
- Loosen harness by pressing the harness
adjustment button (1) while pulling on the
harness straps (2). The harness adjustment
button is located inside the slot on the seat pad.
2
- Press chest clip button to release the buckles
(1). Separate chest clip and spread harness
straps apart (2).
3
- Place buckle tongues into both sides of the
seat in the buckle holders to make placing baby
more convenient.
4
- Place child in child restraint in seated position.
5
- The child should be seated against both the
back and bottom of the seat with no gap
behind the child. DO NOT allow child to slouch.
Gently guide child's arms through harness
loops.
6
- Insert buckle tongues into buckle and listen
for clicks. Pull on buckle to verify it is latched.
28 PIPA lite instructions