Product Overview - Nuna PIPA lite Mode D'emploi

Product Overview

Canopy
1
- To attach the canopy, snap the canopy to the
canopy mount on both sides. To open the
canopy, pull the canopy toward the front of the
seat, and to close the canopy, push it back.
2
- To remove the canopy, reverse step 1. Then
unsnap the seat pad from the shell and lift
fabric up.
3
- Press the canopy release button (1) and pull
canopy through the fabric slot (2).
Repeat on opposite side.
Dream Drape
Included on PIPA lite lx models.
4
- Unzip the zipper behind the front canopy bow.
5
- Pull the dream drape
Attach the dream drape
each corner to the front of the carrier.
Shoulder Harness Pads
6
- Shoulder harness pads are removable.
Unfasten the hook and loop to remove the
shoulder harness pads.
18
PIPA lite instructions
™
out of the compartment.
™
™
to the magnets on