Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
6
Drill 2 holes for the inner chimney holder. Fix the inner chimney mount to the wall
using the supplied screws (4 mm x 40 mm) and dowels.
Note: The inner chimney bracket is used to fasten the chimney. The following
diagram serves as a reference. The chimney is attached to the wall plate at
the end of the installation.
Drill 2 holes for the outer chimney holder.
28
Publicité
Chapitres
Table des Matières
Dépannage
