MSI X58A-GD45 Serie Mode D'emploi page 46

MS-7522 Mainboard
▶ CH1/ CH2/ CH3 tRRD
Specifies the active-to-active delay of different banks.
▶ CH1/ CH2/ CH3 tRTP
Time interval between a read and a precharge command.
▶ CH1/ CH2/ CH3 tFAW
This item is used to set the tFAW timing.
▶ Current CH1/ CH2/ CH3 tdrRdTRd/ tddRdTRd/ tsrRdTWr/ tdrRdTWr/ tddRdTWr/
tsrWrTRd/ tddWrTWr/ tsrRDTRd/ tsrWrTWr
These item show the advanced DRAM timings.
▶ Channel 1/ Channel2 Advanced Memory Setting
Setting to [Auto] enables the advance memory timing automatically to be determined
by BIOS. Setting to [Manual] allows you to set the following advanced memory tim-
ings.
▶ Memory Ratio
This item allows you to set the memory multiplier.
▶ Adjusted DRAM Frequency (MHz)
It shows the adjusted DRAM frequency. Read-only.
▶ Uncore Ratio
This item allows you to set the uncore multiplier.
▶ Adjusted Uncore Frequency (MHz)
It shows the adjusted uncore frequency. Read-only.
▶ QPI Configuration
Press <Enter> to enter the sub-menu.
▶ QPI Links Speed
This item allows you to select the QPI links speed type.
▶ QPI Frequency
This item allows you to select the QPI frequency.
▶ ClockGen Tuner
Press <Enter> to enter the sub-menu.
▶ CPU Amplitude Control/ PCI Express Amplitude Control
These items are used to select the CPU/ PCI Express clock amplitude.
▶ CPU CLK Skew/ MCH CLK Skew
These items are used to select the CPU/ MCH chipset clock skew. They can help
CPU to reach the higher overclocking performance.
▶ Adjust PCI Frequency (MHz)
This field allows you to select the PCI frequency (in MHz).
▶ Adjust PCI-E Frequency (MHz)
This field allows you to select the PCIE frequency (in MHz).
En-36