MSI X58A-GD45 Serie Mode D'emploi page 28

MS-7522 Mainboard
Front USB Connector: JUSB1, JUSB2
This connector, compliant with Intel
necting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3
players, printers, modems and the like.
USB 2.0 Bracket (optional)
Front USB Connector: JUSB3
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
USB 3.0 Bracket (optional)
Important
• Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
• If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
En-18
I/O Connectivity Design Guide, is ideal for con-
®
* The MB layout in this figure is for reference only.
* The MB layout in this figure is for reference only.