Somnetics Transcend 365 MiniCPAP Guide Rapide page 20

Transcend 365 miniCPAP Auto
Ending therapy and entering Drying Mode
When you are finished with your therapy session, press the Center button to return your
CPAP to Standby mode. Press and hold the Up and Down buttons for three seconds to
start Drying Mode. This mode will last 30 minutes unless you interrupt it by pressing any
button. After the 30-minute drying cycle, the blower will turn off and the device will
automatically enter Standby Mode.
Dry mode flushes your CPAP device, tubing and mask of any residual moisture left from a
therapy session.
Caution: Do not attempt to use the 365 miniCPAP Auto while in Drying mode. The device
will not provide the prescribed therapy pressure while in Drying mode.
The 365 miniCPAP Auto Humidifier_________
The 365 miniCPAP Auto™ is the only continuous positive airway pressure (CPAP) device
licensed to use advanced, built-in Capillary Force Vaporization™ (CFV) humidification
technology. CFV instantaneously combines humidified vapor with the airstream on
inhalation for warm, moist, comfortable airflow. This unique humidifier utilizes a wick to
draw distilled water up to the heating element, which then delivers warm vapor upon
inhalation. This specialized method of delivering humidification requires less water,
significantly reducing the size of the humidifier.
Caution: Distilled water is required for use with this device because of the
humidifier's unique heating element. Failure to use distilled water will void component
warranty. Failure to use distilled water will also damage the humidifier and its heating
element, requiring these pieces to be replaced.
TM
Quick Guide
20
ENGLISH
Push and hold the Up and
Down buttons to enter
Drying Mode.
Page 20