AVM FRITZ! 600 Mode D'emploi page 5

4. Within 2 minutes, start WPS on your FRITZ!Box:
- FRITZ!Box with WPS or Connect/WPS
button: press button briefl y
- FRITZ!Boxes with WLAN or WLAN/
WPS button: press button for about 6
seconds until the WLAN LED fl ashes.
When the LED on the FRITZ!Repeater lights up permanently, the
Wi-Fi connection has been established.
If the LED starts fl ashing slowly green again, the connection was
not established. Repeat the connection instructions starting from
step 3.
5. Insert the FRITZ!Repeater into an outlet located about halfway
between the FRITZ!Box and the wireless devices to be added to the
Wi-Fi network. The FRITZ!Repeater and your FRITZ!Box connect
once more. As soon as the connection has been established, the
LED lights up. The FRITZ!Repeater 600 is ready for operation.
5
Wi-Fi
8
4
Wi-Fi
LED lights up green
the FRITZ!Repeater has a good Wi-Fi
connection and is ready for operation.
LED lights up orange
the FRITZ!Repeater has a weak
wireless LAN connection. Plug the
FRITZ!Repeater into an outlet closer to
your FRITZ!Box.
LED fl ashing continuously orange
cannot connect via Wi-Fi. Plug the
FRITZ!Repeater into an outlet closer to
your FRITZ!Box.
With the FRITZ!App WLAN you can determine the optimum
position for your FRITZ!Repeater in the home network of your
FRITZ!Box.
9